Encryption Setup Menu - Sony PCS-1 Operating Instructions Manual

LAN Line Status
Status
LAN Line Status
Page: 3/4
LAN1 LAN2 LAN3
Status:
Cause Code:
: No call in progress
: No network
: Call in progress
LAN Connection Status
Status
LAN Connection Status
Page: 4/4
Send
Audio Bit Rate
97448 bps
Video Bit Rate
1622620 bps
Receive Packet Loss
Audio Data
Video Data
Camera Control Data
Packet Recovery Ratio
LAN Mode Speed : 100Mbps Duplex : Full
LAN4 LAN5
: Connected
: Call failed
End
Receive
96016 bps
1627056 bps
0 / 7579 0 %
0 / 58085 0 %
0 / 2 0 %
/ %
End

Encryption Setup Menu

The Encryption Setup menu is used to
conduct a videoconference using the
encryption feature. The encryption feature
allows you to conduct a highly confidential
conference.
For details on a videoconference with the
encryption feature, see Chapter 7.
Encryption Setup
Page: 1/1
Signal Encryption Methods
Signal Encryption Methods
Selects the encryption method you use.
Standard encryption: Enables use of the
standard encryption method.
Proprietary encryption: Enables use of
Sony's original encryption method.
Off: Disables use of the encryption function.
Encryption Mode
Displays when "Standard encryption" is
selected for the "Signal Encryption
Methods".
Connect priority: Connects with
encryption to a remote party with
standard encrypted connection enabled.
Connects without encryption to parties
unable to connect with standard
encryption or parties with encryption set
to off.
Encrypt Priority: Connects only to remote
parties with standard encrypted
connection enabled.
Encryption Password
Displays when "Proprietary encryption" is
selected for "Signal Encryption Methods" .
Set the password to be entered when
conducting encrypted videoconferences (13
to 20 characters).
Registering Local Information
Off
Save Cancel
65