Preparing For A Multipoint Videoconference; Installing The Mcu Software - Sony PCS-1 Operating Instructions Manual

Video communication system
Hide thumbs Also See for PCS-1:
Table of Contents

Advertisement

Preparing for a multipoint
videoconference

Installing the MCU software

Notes on installing the MCU software
• You cannot install the software if the write-protect tab on the Memory Stick
in which the MCU software is stored is set to "LOCK".
• Once the MCU software is installed in the Communication Terminal, the
software will not be used again.
• You cannot install the MCU software which is copied to another Memory
Stick with a computer, etc.
1
Set the power switch on the right side of the Communication Terminal to
the off position (
2
Insert the "Memory Stick" containing the PCS-323M1 or PCS-320M1
MCU software into the Memory Stick slot.
Insert the "Memory Stick" in the direction of the arrow with the mark facing
upward.
3
Set the power switch on the right side of the Communication Terminal to
the on position (
The MCU software is installed in the Communication Terminal.
a
).
PCS-323M1 or PCS-320M1 MCU software
@
).

Preparing for a multipoint videoconference

177

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-1p

Table of Contents