Sony PCS-1 Operating Instructions Manual page 49

For details, see "Displaying the Picture on
a Projector or Monitor" on page 156.
Standby Mode
Sets whether the Communication Terminal
is set to standby mode if it is not operated for
a specified period of time.
On: Activates standby mode.
Off: Deactivates standby mode.
Standby Time
Specifies the time that the system remains on
before entering the standby mode. You can
specify a time between 1 and 99 minutes.
For details on standby mode, see "Standby
Mode Function" on page 30.
Time Display
Selects whether you display the elapsed time
on the monitor screen during the conference.
On: Displays the elapsed time.
Off: Does not display the elapsed time.
Note
During communication, some items are not
displayed.
Page 2/4
General Setup
Page: 2/4
MM/DD/YYYY
Clock Set 11/30/2003
Last Number Registration
T.120 PC Address
Whiteboard Attachment
Whiteboard Size
Whiteboard Size Measurement
Clock Set
Enter the current date and time.
Last Number Registration
Selects whether or not to register the remote
party in the Phone Book after the conference
has finished.
On: If the remote party has not yet been
registered in the Phone Book, the
message "Register this participant in the
list?" appears on the monitor screen after
the conference has finished. When you
select "OK", the List Edit menu opens.
HH:MM:SS
19:25:53
On
. . .
Vertical
3'0"x4'0"
Inches
Save Cancel
Off: The above message does not appear.
T.120 PC Address
When conducting a data conference based
on the T.120 standard using NetMeeting,
input the IP address of the computer (for the
ISDN connection).
For details on a data conference based on
the T.120 standard, see "Conducting a Data
Conference Using NetMeeting – T.120 Data
Conference" on page 142.
Whiteboard Attachment
Selects whether to attach the optional
mimio-Xi vertically or horizontally on a
whiteboard.
Vertical: Attaches the mimio-Xi vertically
on a whiteboard.
Horizontal: Attaches the mimio-Xi
horizontally on a whiteboard.
Whiteboard Size
Selects the size (height × width) of the
whiteboard you are using. The sizes shown
in the menu change according to
"Whiteboard Attachment" setting.
Selects from among 2'0" × 3'0" (0.6 ×
0.9 m), 3'0" × 4'0" (0.9 × 1.2 m), 4'0" × 6'0"
(1.2 × 1.8 m) and 4'0" × 8'0" (1.2 × 2.4 m)
when "Whiteboard Attachment" is set to
"Vertical".
Selects from among 3'0" × 2'0" (0.9× 0.6 m),
4'0" × 3'0" (1.2 × 0.9 m), 6'0" × 4'0" (1.8 ×
1.2 m) and 8'0" × 4'0" (2.4 × 1.2 m) when
"Whiteboard Attachment" is set to
"Horizontal".
Whiteboard Size Measurement
Selects whether to display the whiteboard
size in inches or meters.
Inches: Displays the whiteboard size in
inches.
Meters: Displays the whiteboard size in
meters.
Registering Local Information
49