Laserscanner Cln (Laser Scanner Cleaning Mode Setting) - Kyocera ECOSYS M6026cdn Type B Operation Manual

Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Backgrnd Density
Correct. Bk Line: a b
1 *Off
*********************
2
On(Low)
3
On(High)

LaserScanner Cln (Laser scanner cleaning mode setting)

This sets the cleaning mode for the laser scanner. When the printing quality declines, cleaning the laser scanner
can restore the printing quality.
Use the procedure below to set the laser scanner cleaning mode setting.
Sys. Menu/Count.:a b
;
Document Box
<
Edit Destination
=
*********************
Adjust/Maint.
Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Backgrnd Density
2
a b
[ Exit ]
3
4
5
6
1
[ Exit ]
2
a b
[ Exit ]
3
8-135
Default Setting (System Menu)
Press the OK key. The Adjust/Maint. menu
appears.
Press the  or  key to select [Correct. Bk Line].
Press the OK key. Correct. Bk Line appears.
Press the  or  key to select [Off], [On(Low)] or
[On(High)].
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
Press the OK key. The Adjust/Maint. menu
appears.
Press the  or  key to select [Service Setting].
8