Kyocera ECOSYS M6026cdn Type B Operation Manual page 484

Symptom
Printouts are wrinkled
or curled.
Cannot print.
Documents are
printed improperly.
Cannot print with USB
memory.
When displaying an
image sent from the
machine on the PC, an
image size is shrunk
vertically or
horizontally.
USB memory not
recognized.
Skewed-color printout
Checkpoints
Is the paper curled, folded or
wrinkled?
Are there any loose scraps or
jammed paper in the
machine?
Is the paper damp?
Is the machine plugged in?
Is the machine powered on?
Is the printer cable or
network cable connected?
Was the machine powered
on before the printer cable
was connected?
Is the print job paused?
Are the application software
settings at the PC set
properly?
Is the USB host blocked?
—
Have you selected
200×100dpi Normal or
200×400dpi Super Fine for
the scan resolution?
—
Is the USB host blocked?
—
Corrective Actions
Replace the paper with new paper.
Remove any jammed paper.
Replace the paper with new paper.
Plug the power cord into an AC
outlet.
Turn on the main power switch.
Connect the correct printer cable or
network cable securely.
Power on the machine after
connecting the printer cable.
Press [Resume] (the Left Select
key) to resume printing.
Check that the printer driver and
application software settings are
set properly.
Select [Unblock] in the USB host
settings.
Check that the USB memory is
securely plugged into the machine.
Select a scan resolution other than
200×100dpi Normal or 200×400dpi
Super Fine when sending an
image.
Check that the USB memory is
securely plugged into the machine.
Select [Unblock] in the USB host
settings.
Conduct color registration using
the operation panel.
Conduct color calibration using the
operation panel.
10-4
Troubleshooting
Reference
Page
2-47
10-16
2-47
—
2-7
2-5
2-5
2-7
7-19
—
8-209
—
5-17
—
8-209
8-127
8-126