Kyocera ECOSYS M6026cdn Type B Operation Manual page 467

USB Device:
1 *Unblock
*********************
2
Block
USB Storage (USB storage setting)
This locks and protects the USB interface connector (USB Storage). The default setting is Unblock.
NOTE:
This function is available when USB Host is set to Unblock.
Use the procedure below to specify the USB Host setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name: L b
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
Optional Network
3
NW InterfaceSend
5
6
a b
7
8
1
[ Exit ]
[ Login ]
2
a b
[ Exit ]
3
8-211
Default Setting (System Menu)
Press the  or  key to select [USB Device].
Press the OK key. USB Device appears.
Press the  or  key to select [Unblock] or
[Block].
Press the OK key. Completed. is displayed and the
screen returns to the System menu.
In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
The System/Network menu appears.
Press the  or  key to select [I/F Block Set.].
8