Kyocera ECOSYS M6026cdn Type B Operation Manual page 466

USB Host:
1 *Unblock
*********************
2
Block
USB Device (USB interface setting)
This locks and protects the USB interface connector (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name: L b
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
Optional Network
3
NW InterfaceSend
I/F Block Set.:
1
*********************
USB Host
2
USB Device
3
USB Storage
6
a b
7
8
1
[ Exit ]
[ Login ]
2
a b
[ Exit ]
3
4
a b
[ Exit ]
8-210
Default Setting (System Menu)
Press the OK key. USB Host appears.
Press the  or  key to select [Unblock] or
[Block].
Press the OK key. Completed. is displayed and the
screen returns to the I/F Block Set. menu.
In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
The System/Network menu appears.
Press the  or  key to select [I/F Block Set.].
Press the OK key. The I/F Block Set. menu
appears.