Optional Memory; Sd Card - Kyocera ECOSYS M6026cdn Type B Operation Manual

Format.
Are you sure?
z SD Card
[ Yes

Optional Memory

If optional memory is installed, you can specify whether most of the memory is allocated to the copy function or
the print function.
Normal
Copy Priority
Printer Priority
Use the procedure below to adjust the Optional Memory.
Sys. Menu/Count.: a b
4
User/Job Account
5
User Property
6
*********************
Common Settings
] [ No ]
Item
The optional memory is allocated to the
copy function or the print function based on
a previously selected setting.
This allocates most memory to data
spooling for sort copy. When copy priority is
specified, the number of pages that can be
printed in sort copying increases.
The amount of memory allocated to RAM
disk memory and the amount of memory
allocated to drawing can be increased.
When print priority is specified, the
maximum value that can be set in RAM
disk mode increases.
[ Exit ]
4
Press the OK key. The Common Settings menu
appears.
5
Press [Yes] (the Left Select key). The Formatting
SD card... screen appears and SD card formatting
begins. Once the formatting ends, the Common
Settings menu reappears.
Press [No] (the Right Select key) returns to the
Common Settings menu without formatting the SD
card.
Description
1
In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
8-66
Default Setting (System Menu)