Kyocera ECOSYS M6026cdn Type B Operation Manual page 405

Low Power Timer
The time until the machine enters low power mode can be set. The range that can be set is as follows.
For Europe
Except for Europe
Use the procedure below to set the Low Power Timer. The default setting is 1 minute.
Sys. Menu/Count.:a b
4
User/Job Account
5
User Property
6
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
Login User Name: L b
*******************
Login Password:
Timer Setting:
1
*********************
Auto Panel Reset
2
PanelReset Timer
3
Low Power Timer
30 ppm model: 1 to 60 minutes (1minute increments)
35 ppm model: 1 to 120 minutes (1minute increments)
1 to 240 minutes (1minute increments)
[ Exit ]
[ Exit ]
[ Login ]
a b
[ Exit ]
Value
1
In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the  or  key to select [Timer Setting], and
press the OK key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
4
The Timer Settings menu appears.
5
Press the  or  key to select [Low Power Timer].
8-149
Default Setting (System Menu)
8