Kyocera ECOSYS M6026cdn Type B Operation Manual page 442

Network Setting: a b
5
*********************
Secure Protocol
6
Host Name
7
LAN Interface
Secure Protocol: a b
1
*********************
SSL
2
IPP Security
3
HTTP Security
SSL:
1
Off
2 *On *********************
IPP Security
Specify the protocol to be used for IPP. The default setting is IPP/IPP over SSL.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name: L b
*******************
Login Password:
4
[ Exit ]
5
6
[ Exit ]
7
8
a b
9
10
1
[ Exit ]
[ Login ]
8-186
Default Setting (System Menu)
Press the OK key. The Network Setting menu
appears.
Press the  or  key to select [Secure Protocol].
Press the OK key. Secure Protocol appears.
Press the  or  key to select [SSL].
Press the OK key. SSL appears.
Press the  or  key to select [On] or [Off].
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).