E-Mail Settings - Kyocera ECOSYS M6026cdn Type B Operation Manual

E-mail settings

By configuring the SMTP settings, you can send E-mail notifications on completed jobs.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
In addition, check the following.
• The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.
• SMTP settings
Use Command Center RX to register the IP address or host name of the SMTP server.
• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1
Access Command Center RX by referring to Accessing Command Center RX on page 2-37.
2
From the Function Settings menu, click E-mail.
2-40
Preparation before Use