Optional interface (Optional interface card setting)
This locks and protects the optional interface slot. The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name: L b
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
Optional Network
3
NW InterfaceSend
I/F Block Set.:
1
*********************
USB Host
2
USB Device
3
USB Storage
Option I/F 1:
1 *Unblock
*********************
2
Block
1
[ Exit
]
[ Login
]
2
a b
[ Exit
]
3
4
a b
[ Exit
]
5
6
a b
7
8
8-213
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the or
key to select [System/Network].
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
The System/Network menu appears.
Press the or key to select [I/F Block Set.].
Press the OK key. The I/F Block Set. menu appears.
Press the or key to select [Option I/F 1] or
[Option I/F 2].
For ECOSYS M6526cdn/ECOSYS M6526cdn
Type B, select [Option I/F].
Press the OK key. Option I/F appears.
Press the or key to select [Unblock] or [Block].
Press the OK key. Completed. is displayed and the
screen returns to the System menu.
8