Change User Password; Current Password; New Password - Panasonic KX-UT133-B Administrator's Manual

4.4.3 Change User Password

Default Value
Configuration File Reference
4.4.3 Change User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
•
After you change the user password, the next time you access the Web user interface, the
authentication dialog box appears. 2 consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
4.4.3.1 Change User Password

Current Password

Description
Value Range
Default Value
Configuration File Reference

New Password

Description
Value Range
84 Administrator Guide
Not stored.
ADMIN_PASS (Page 149)
Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
Not stored.
USER_PASS (Page 149)
Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
Document Version 2011-06