User Password; Current Password; New Password - Panasonic KX-UTG200 Administrator's Manual
Hide thumbs
Also See for KX-UTG200:
- Setup manual (412 pages) ,
- Administrator's manual (312 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
Value Range
Default Value
Configuration File Reference
4.4.3 User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
4.4.3.1 User Password
Current Password
Description
Value Range
Default Value
Configuration File Reference
New Password
Description
Value Range
Document Version 2014-05
6–16 characters (except ", &, ', :, <, >, and space)
Note
•
This value must be the same as the value entered in [New
Password].
Not stored.
ADMIN_PASS (Page 219)
Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
Not stored.
USER_PASS (Page 220)
Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
4.4.3 User Password
Administrator Guide
101
Advertisement
Table of Contents
