Rtcp Interval; Jitter Buffer; Maximum Delay; Minimum Delay - Panasonic KX-UT133-B Administrator's Manual

Configuration File Reference

RTCP Interval

Description
Value Range
Default Value
Configuration File Reference

4.5.4.3 Jitter Buffer

Maximum Delay

Description
Value Range
Default Value
Configuration File Reference

Minimum Delay

Description
Value Range
Default Value
Configuration File Reference

Initial Delay

Description
Document Version 2011-06
RTCP_ENABLE_n (Page 205)
Specifies the interval, in seconds, between RTCP packets.
5–65535
5
RTCP_INTVL_n (Page 202)
Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
3–50 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than [Initial Delay]
–
This value must be greater than [Minimum Delay]
–
[Initial Delay] must be greater than or equal to [Minimum
Delay]
20 (´ 10 ms)
MAX_DELAY_n (Page 202)
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to [Initial Delay]
–
This value must be less than [Maximum Delay]
–
[Maximum Delay] must be greater than [Initial Delay]
2 (´ 10 ms)
MIN_DELAY_n (Page 203)
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
4.5.4 VoIP Settings [Line 1]–[Line 4]
Administrator Guide 105