4.5.3 VoIP Settings
Value Range
Default Value
Configuration File Reference
Minimum RTP Port Number
Description
Value Range
Default Value
Configuration File Reference
Maximum RTP Port Number
Description
Value Range
Default Value
Configuration File Reference
Telephone-event Payload Type
Description
Value Range
Default Value
Configuration File Reference
4.5.3.2 Voice Quality Report
Server Address
Description
Value Range
Default Value
Configuration File Reference
126
Administrator Guide
•
20
•
30
•
40
20
RTP_PTIME (Page 261)
Specifies the lowest port number that the unit will use for RTP packets.
1024–59598 (even number only)
16000
RTP_PORT_MIN (Page 261)
Specifies the highest port number that the unit will use for RTP packets.
1424–59998 (even number only)
20000
RTP_PORT_MAX (Page 261)
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[Outband].
96–127
101
TELEVENT_PAYLOAD (Page 252)
Specifies the IP address or FQDN of the collector server.
Max. 256 characters
Not stored.
VQREPORT_COLLECTOR_ADDRESS (Page 264)
Document Version 2015-02