Soft Switch Set; Description; Default Setting; Country For Each Marketing Area - Konica Minolta magicolor 1680MF Service Manual

15. SOFT SWITCH set

15. SOFT SWITCH set

15.1 Description

This machine is equipped with totally 64 soft switches that are used for fax adjustment in
order to conform to the standard of each country.
The default setting is changeable.
The default setting of soft switch is automatically changed according to the following set-
tings.
• The marketing area is set in procedures of [UTILITY] → [ADMIN. MANAGEMENT] →
[USER SETTING] → [PTT SETTING].
• The marketing area is set at [PTT Setting] by using LSU utility software.
• When the setting is made in the procedures of [SERVICE MODE] → [CLEAR DATA] →
[SRAM CLEAR], the default setting is defined according to the current setting of market-
ing area.
Bit No. can be changed with the following way.
• [SOFT SWITCH] of [SERVICE MODE].
See P.145
SERVICE MODE
DISPLAY
FUNCTION
SOFT SWITCH
Hex-binary
conversion list
4 (8)
3 (7)
Bit No.
2 (6)
1 (5)

15.2 Default setting

15.2.1

Country for each marketing area

NOTE
• A different country may be applicable depending on the communications stan-
dard.
• The marketing area settings is set in the procedure of [UTILITY] → [ADMIN. MAN-
AGEMENT] → [USER SETTING] → [PTT SETTING].
See P.103
154
0 1 2 3 4 5
0 0 0 0 0 0
0 0 0 0 1 1
0 0 1 1 0 0
0 1 0 1 0 1
Field Service Ver. 1.0 Nov. 2008
SOFT SWITCH
#01:100 000 00
#02:00 000 100
#03:01 100 001
Bit No. 1 2 3 4 5 6 7 8
HEX
6 7 8 9 A B
0 0 1 1 1 1
1 1 0 0 0 0
1 1 0 0 1 1
0 1 0 1 0 1
A0FDF3E504DA
C D E F
1 1 1 1
1 1 1 1
0 0 1 1
0 1 0 1