Discharged Gas State (The State At Compressor Outlet Or Condenser Inlet); State Of Condensed Liquid; State Of Expansion Valve Outlet (The State Of Evaporator Inlet) - TCL TAC-07CS Service Manual

Wall mounted split-type air conditioners
Table of Contents

Advertisement

3) Discharged gas state (the state at compressor outlet or condenser inlet) : An adiabatic change is almost
seen in compressor, so the state of discharged gas follows the isentropic line at point B of Figure 7.4.
Accordingly the state point of discharge gas is the intersection with wet-vapor pressure 18.1 kg/cm
phy 1.138kcal/kg °K at condensation temperature 46°C, and is a point of pressure 18.1kg/cm
75°C, enthalpy 158.0 Kcal/kg, specific volume 0.00152m
(Figure 7.4)
P
P
d
Figure 7.4 A state of discharge gas
4) State of condensed liquid : The temperature of refrigerant liquid just before expansion valve in the design con-
dition is 40°C, so the state point is the intersection between 46°C wet air pressure 18.1kg/cm
isothermic line (point C of Figure 7.5) in pressure 18.1kg/cm2 abs, temperature 40°C, enthalpy 112.0 Kcal/kg,
supercooling 6°C.
5) State of expansion valve outlet (The state of evaporator inlet) : The state is changed on isentropic line with-
out thermal input/output in expansion valve, so the state point is the intersection between enthalpy 112.0
Kcal/kg line and evaporation temperature 8°C isothermal line (point D of Figure 7.6) at pressure 6.54kg/cm
abs, temperature 8°C, enthalpy 112.0 Kcal/kg, specific volume 1.0080m
degree of dryness 0.2.
P
40°C
P
d
Isenthalpy line
P
s
D
112.0 kcal/kg
Figure 7.6 A state of expansion valve outlet
TCL Air Conditioner Service Manual
Isenthalpy line
td = 46°C
B
158.0kcal/kg
i
tc=
8°C
i
/kg, entropy 1.182 Kcal/kg °K, and superheat 30°C.
3
Supercooling=6°C
P
C
P
d
112kcal/kg
Figure 7.5 A state of condensed liquid
/kg, entrophy 1.025 Kcal/kg °K, and the
2
Temperature
just before
expansion v/v
=40°C
e
d
P
g
f
O
Figure 7.7 A standard refrigerating cycle
11
abs, temperature
2
td = 46°C
40°C
i
abs and 40°C
2
q
2
Condensation temp=46°C
Condensation
46°C
Suction gas temp. = -16°C
40
Dry saturated vapor
Evaporation temp.= 8°C
Evaporation
q3 = (ia-ig)
-if)
q1 = (ia
abs entro-
2
2
b
c
a
Al

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents