Engine Mount - Seagull Models Ultimate Instruction Manual

ULTIMATE.
Lower wing
bottom.
Grind.
Lower wing
bottom.
PLASTIC STRAP INSTALLATION
LOWER WING.
Installing the plastic strap of lower wing for
wing strut as same as pictures below.
A
Lower wing top.
Slot.
Lower wing top.
(do not use C/A glue).
A
8
B
A
B
Epoxy glue
B
Instruction Manual.
Repeat the procedure for the other
wing haft.
PLASTIC STRAP INSTALLATION
UPPER WING.
Repeat the procedure as same as
lower wing. See pictures below.
A
Slot.
B
Upper wing bottom.
B
Repeat the procedure for the other
wing half.

ENGINE MOUNT.

See pictures below:
4x25mm.
Mark and drill 4 holes for engine mount.
Upper wing bottom.
A
Epoxy glue
(do not use C/A glue).