Table of Contents
Advertisement
ULTIMATE.
MOUNTING THE CONTROL CLASP.
See pictures below:
2x20mm.
Control clasp.
2 screws.
INSTALLING RECEIVER.
1) Plug the six servo leads and the switch
lead into the receiver.Plug the battery pack lead
into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
Receiver.
Tie wrap.
18
Instruction Manual.
CABANE STRUT INSTALLATION.
1) Remove the covering in the top of the
fuselage for the cabane struts.
2) Slide the cabane into position.
Factory Pre-Assembled
This part will remove
away when the cabane locate
in correct the possition.
3) Secure the cabane into position using 4
socket head bolts ( Type B).
Antenna.
(B) 3x10mm(4pcs).
The cabane.
Advertisement
Table of Contents
