20
Annotating images
4. Use the joystick to select Sketch.
5. Push the joystick to display a sketchboard.
6. On this sketchboard you can:
• Draw a sketch.
• Change the color of the lines.
• Erase lines and start again.
• Erase the entire sketch.
The sketch will now be added to what is called a group, and will be grouped together
with the infrared image in the image archive, and also when moving files from the
camera to reporting software on the computer.
20.7.3 Adding a sketch to an infrared image
Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down and release it.
2. On the bottom toolbar, select the infrared image and push the joystick.
3. On the left toolbar, select the Sketch toolbar button and push the joystick.
4. Do one or more of the following:
• Draw a sketch.
• Change the color of the lines.
• Erase lines and start again.
• Erase the entire sketch.
20.7.4 Adding a sketch to a digital photo
Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down and release it.
2. On the bottom toolbar, select the digital photo and push the joystick.
3. On the left toolbar, select the Sketch toolbar button and push the joystick.
4. Do one or more of the following:
• Draw a sketch.
• Change the color of the lines.
• Erase lines and start again.
• Erase the entire sketch.
#T559772; r.7877/7877; en-US
56