Adding A Sketch; General; Adding A Separate Sketch - FLIR T4xx series User Manual

20 Annotating images
5. Do one of the following:
• To edit a field, click
• Insert field: Select this option to insert a new field.
• Duplicate field: Select this option to duplicate the currently selected field.
• Rename field: Select this option to rename the currently selected field.
• Keep as default value: Enable this option to keep the current value as a default
value. The default value will be displayed for this field the next time you create a
table.
• Store added values: Enable this option to store added values in a glossary,
which make them easier to find the next time you create a table.
• To edit a value, click the value. This will display the following dialog box where you
can create new values, edit existing values or delete values:
6. Click OK. The table will now be added to to what is called a group, and will be
grouped together with the infrared image in the image archive, and also when moving
files from the camera to reporting software on the computer.

20.7 Adding a sketch

20.7.1 General

A sketch is freehand drawing that you create in a sketch work area separate from the in-
frared image. You can use the sketch feature to create a simple drawing, write down
comments, add dimensions, etc.
Sketches can be added to any of the following:
• A separate sketch.
• A sketch on an infrared image.
• A sketch on a digital photo.

20.7.2 Adding a separate sketch

Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down and release it.
2. Use the joystick to select
3. Push the joystick to display a submenu.
#T559772; r.7877/7877; en-US
. This will display the following dialog box.
.
55