Camera Parts; Rear View; Figure; Explanation - FLIR T4xx series User Manual

8

Camera parts

8.1 Rear view

8.1.1 Figure

8.1.2 Explanation

1. Touch screen LCD.
2. Antenna for wireless communication.
3. Digital zoom button (2×, 4× and 8×).
Note
• The zoom factor is subject to camera model.
• The 8× zoom factor is not supported when the feature Same field of view is enabled. For more
information about this feature, see 22.2 Changing preferences, page 58.
4. Programmable button.
5. Joystick: Move up/down or left/right to navigate on menus, in dialog boxes, and in the
image archive. Push to confirm choices.
6. Menu/Back button: Push to display the menu on the screen, and to go back in dialog
boxes.
7. Mode button: Push to display the mode selector and select a camera mode. The
modes that can be selected are:
• Thermal camera: Using this mode, the camera captures infrared images.
• Digital camera: Using this mode, the camera captures visual images.
• Thermal fusion: Using this mode, the camera captures an image where some
parts are displayed as an infrared image and some parts as a visual image, de-
pending on the temperature.
• Picture in Picture: Using this mode, the camera captures an image where the mid-
dle part is displayed as an infrared image and the outer frame as a visual image.
• MSX (Multi Spectral Dynamic Imaging): Using this mode, the camera captures in-
frared images where the edges of the objects are enhanced.
8. A/M button: This button has two main functions:
• Push to switch between automatic and manual adjustment modes.
• Push and hold the button until you hear a clicking sound to autoadjust the image.
9. Archive button: Push to open/close the image gallery.
#T559772; r.7877/7877; en-US
14