22
Changing settings
22.1 Changing camera settings
22.1.1 General
On this tab you can change the following:
• Temperature range, i.e. the temperature range used for measuring objects. You must
change the temperature range according to the expected temperature of the object
you are inspecting.
• Add-on lens.
• Display intensity.
• Auto power off.
• Digital camera lamp.
• Calibrate touchscreen.
• Calibrate compass.
• Reset to default settings.
22.1.2 Procedure
Follow this procedure:
1. Push the Menu/Back button.
2. On the main menu, go to the Mode button
3. On the Mode menu, select Settings and push the joystick.
4. On the Camera tab, go to the setting that you want to change.
5. Push the joystick.
6. Move the joystick up/down to select a new value.
7. Push the joystick to confirm.
22.2 Changing preferences
22.2.1 General
On this tab you can change the following:
• Save button.
This setting controls the behavior of the save button. The available options are the
following:
• Preview/Save.
• Save directly (default).
• Always preview.
• Simultaneously save photo.
This setting controls whether a digital photo shall be automatically saved together with
the infrared image.
• Same field of view.
When this setting is enabled, the field of view of the digital camera is synchronized
with the field of view of the infrared camera.
Note
The 8× zoom factor is not supported when the feature Same field of view is enabled.
• Programmable button.
This setting controls which function shall be assigned to the programmable button.
• View.
This setting controls the visibility of overlay graphics on the image, such as time, com-
pass, measurement results, etc.
#T559772; r.7877/7877; en-US
and push the joystick.
58