Fetching Data From External Extech Meters; General; Figure; Supported Extech Meters - FLIR T4xx series User Manual

14
Fetching data from external
Extech meters

14.1 General

You can fetch data from an external Extech meter and merge this data into the result ta-
ble in the infrared image.

14.2 Figure

14.3 Supported Extech meters

• Extech Moisture Meter MO297
• Extech Clamp Meter EX845

14.4 Technical support for Extech meters

support@extech.com
This support is for Extech meters only. For technical support for infrared cameras, go to
http://support.flir.com.
For more information about products from Extech Instruments, go to http://www.extech.
com/instruments/.

14.5 Procedure

Note
This procedure assumes that you have paired the Bluetooth devices and set the functionality of the
Save button to Preview/Save.
Follow this procedure:
1. Turn on the camera.
2. Turn on the Extech meter.
3. On the meter, enable Bluetooth mode. Refer to the user documentation for the meter
for information on how to do this.
4. On the meter, choose the quantity that you want to use (voltage, current, resistance,
etc.). Refer to the user documentation for the meter for information on how to do this.
Results from the meter will now automatically be displayed in the result table in the
top left corner of the infrared camera screen.
#T559772; r.7877/7877; en-US
25