Adding A Voice Annotation; Adding A Sketch - FLIR E86-42-14 User Manual

15
1.888.610.7664
Annotating images
Vault
Door
<ObjectID>
A1a1
A1b2
A1c3
<Deviation>
Overload
Moisture
Draft
<Remedy>
Replace
Fix
No action
<Severity>
Critical
Non-critical
<Severity>

15.4 Adding a voice annotation

A voice annotation is an audio recording that is saved to the infrared image file. The re-
cording can be played back in the camera, and in image analysis and reporting software
from FLIR Systems.
The voice annotation is recorded using the built-in microphone. You can also use a Blue-
tooth-enabled headset. For information on how to pair a headset with the camera, see
section 21 Pairing Bluetooth devices.
Follow this procedure:
1. Open the image in the image archive.
2. Push the navigation pad to display the top toolbar.
3. On the top toolbar, select the
4. On the right toolbar, select the
5. A context menu is displayed.
6. To start a recording, select
7. To stop the recording, select
8. To listen to the recording, select
9. To delete the recording, select
10. When completed, select

15.5 Adding a sketch

You can add a freehand drawing to an infrared image.
Follow this procedure:
1. Open the image in the image archive.
2. Push the navigation pad to display the top toolbar.
3. On the top toolbar, select the
4. On the right toolbar, select the
5. You are now in sketch mode. Draw the sketch by touching the screen.
www.calcert.com
15
10 20
5 25
0 30
#T810587; r. AD/90967/90989; en-US
icon and push the navigation pad.
icon and push the navigation pad.
(Record) and push the navigation pad.
(Stop) and push the navigation pad.
(Play) and push the navigation pad.
(Delete) and push the navigation pad.
(Done) and push the navigation pad.
icon and push the navigation pad.
icon and push the navigation pad.
sales@calcert.com
92