Configuring Wi-Fi; General; Setting Up A Peer-To-Peer Connection (Most Common Use); Connecting The Camera To A Wireless Local Area Network (Less Common Use) - FLIR T4xx series User Manual

Hide thumbs Also See for T4xx series:
Table of Contents

Advertisement

13

Configuring Wi-Fi

13.1 General

Depending on your camera configuration, you can connect the camera to a wireless local
area network (WLAN) using Wi-Fi, or let the camera provide Wi-Fi access to another
device.
You can connect the camera in two different ways:
• Most common use: Setting up a peer-to-peer connection (also called ad hoc or P2P
connection). This method is primarily used with other devices, e.g., an iPhone or iPad.
• Less common use: Connecting the camera to a WLAN.

13.2 Setting up a peer-to-peer connection (most common use)

Follow this procedure:
1. On the main menu, go to the Mode button
2. On the Mode menu, select Settings and push the joystick.
3. Go to theConnectivity tab.
4. Under Wi-Fi, select Connect device.
5. Select Wi-Fi settings.
6. Enter values for the following parameters:
• SSID (the name of the network).
• Channel (the channel that the other device is broadcasting on).
• Encryption (the encryption algorithm, e.g., None or WEP).
• Key (the access key to the network).
• Address (the IP address for the network).
• Gateway (the gateway IP address for the network).
Note
These parameters are set for your camera's network. They will be used by the external device to
connect that device to the network.
7.

13.3 Connecting the camera to a wireless local area network (less common use)

Follow this procedure:
1. On the main menu, go to the Mode button
2. On the Mode menu, select Settings and push the joystick.
3. Go to theConnectivity tab.
4. Under Wi-Fi, select Connect to WLAN.
5. Select Wi-Fi settings.
6. Select one of the available networks.
Password-protected networks are indicated with a padlock icon, and for these you
will need to enter an access key.
7.
Note
Some networks do not broadcast their existence. To connect to such a network, select Add manually
and set all parameters manually according to that network.
#T559772; r.7877/7877; en-US
and push the joystick.
and push the joystick.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

T4 series

Table of Contents