Procedure; Periodically Saving An Image; General; Opening An Image - FLIR T4xx series User Manual

16
Working with images and folders
Card size
256 MB
512 MB
1 GB

16.4.4 Procedure

To save an image without previewing, push the Preview/Save button fully down.
Note
The behavior of the Preview/Save button can be changed on the Preferences tab (Mode > Settings >
Preferences).

16.5 Periodically saving an image

16.5.1 General

You can periodically save images to the SD Memory card.
16.5.2 Procedure
Follow this procedure:
1. Push the Menu/Back button.
2. On the main menu, go to the Mode button
3. On the Mode menu, select Program and push the joystick.
4. Use the joystick to set the desired parameters. These include the following:
• Duration between images.
• Stop conditions:
• Manually.
• Number of images.
• Total time duration.
5. Push the Menu/Back button.
6. • To start the periodic saving, push the Preview/Save button fully down.
• To stop the periodic saving, push the Preview/Save button fully down.

16.6 Opening an image

16.6.1 General
When you save an image, it is stored on the SD Memory Card. To display the image
again, you can recall it from the SD Memory Card.
Note
To leave archive mode, push the Archive button.
16.6.2 Procedure
Follow this procedure:
1. Push the Archive button to display a thumbnail view of recently saved images.
2. Move the joystick left/right or up/down to select a specific image.
3. Push the joystick to display the image.

16.7 Adjusting an image manually

16.7.1 General
An image can be adjusted automatically or manually.
#T559772; r.7877/7877; en-US
No voice annotation
500
1000
2000
and push the joystick.
Incl. 30 seconds voice
annotation
250
500
1000
38