Procedure; Creating A Text; General - FLIR T4xx series User Manual

20 Annotating images

20.4.2 Procedure

Follow this procedure:
1. To preview an image, push and release the Autofocus/Save button fully down.
2. Use the joystick to select
3. Push the joystick to display a submenu.
4. On the submenu, select Voice. This will display a voice recording toolbar.
5. Do one or more of the following, and push the joystick to confirm each choice. Some
buttons have more than one function.
• To start a recording, select
• To pause/resume a recording, select
• To stop a recording, select
• To listen to a recording, select
• To pause a voice annotation that you are listening to, select
• To go to the beginning of a recording, select
• To delete a recording, move the joystick left/right or up/down and select
• To save a recording, select Save.

20.5 Creating a text

20.5.1 General

A text is grouped with an image file. Using this feature, you can annotate images by en-
tering free-form text. This text can be revised later.
20.5.2 Procedure
Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down and release it.
2. Use the joystick to select
3. Push the joystick to display a submenu.
#T559772; r.7877/7877; en-US
.
.
.
.
.
.
.
.
.
52