Setting Up Thermal Fusion - FLIR T4xx series User Manual

17 Working with image modes
Type
Interval
Picture-in-Picture
MSX

17.5 Setting up Thermal fusion

Follow this procedure:
1. Push to display a toolbar.
2. On the toolbar, select
3. Push .
4. To change the portion of infrared in the image, do one of the following:
• Push the joystick left/right to select
the bottom temperature level.
• Push the joystick left/right to select
the top temperature level.
• Push the joystick left/right to select
the top and bottom temperature level at the same time, and left/right to change the
temperature span.
#T559772; r.7877/7877; en-US
Image
(Thermal fusion).
, then push the joystick up/down to change
, then push the joystick up/down to change
, then push the joystick up/down to change
43