Procedure; Adding A Voice Annotation; General; Adding A Sketch - FLIR T4xx series User Manual

19 Annotating images
The camera has a number of default table templates. You can also import your own table
templates from FLIR Tools.

19.3.2 Procedure

Follow this procedure:
1. Open the image in the image archive.
2. Push the joystick. This displays a context menu.
3. Select (Add table) and push the joystick.
4. Select (Add table contents) and push the joystick.
5. This displays the default table template that ships with the camera.
Note
You can select another template by first selecting
6. For each row in the table, do the following:
• Push the joystick. This displays the predefined values.
• Move the joystick up/down to select a predefined value. Push the joystick to
confirm.
• Instead of selecting a predefined value, you can select the keyboard
other text.
7. When completed, select Save & Exit at the bottom of the table. Push the joystick to
confirm.

19.4 Adding a voice annotation

19.4.1 General

A voice annotation is an audio recording that is saved to the infrared image file.
The voice annotation is recorded using a Bluetooth headset. The recording can be
played back in the camera, and in image analysis and reporting software from FLIR
Systems.
19.4.2 Procedure
Follow this procedure:
1. Open the image in the image archive.
2. Push the joystick. This displays a context menu.
3. Select (Add voice annotation) and push the joystick.
4. To start a recording, select
5. To stop the recording, select
6. To listen to the recording, select
7. To delete the recording, select
8. When completed, select

19.5 Adding a sketch

19.5.1 General
You can add a freehand drawing to an image.
#T559879; r.15723/15723; en-US
(Select default template).
(Record) and push the joystick.
(Stop) and push the joystick.
(Play) and push the joystick.
(Delete) and push the joystick.
(Done) and push the joystick.
and enter
50