Adding A Sketch; General; Adding A Separate Sketch; Adding A Sketch To An Infrared Image - FLIR T6xx series User Manual

Table of Contents

Annotating images

20.6 Adding a sketch

A sketch is freehand drawing that you create in a sketch work area separate from the in-

frared image. You can use the sketch feature to create a simple drawing, write down

comments, add dimensions, etc.

Sketches can be added to any of the following:

• A separate sketch.

• A sketch on an infrared image.

• A sketch on a digital photo.

Follow this procedure:

1. To preview an image, push the Autofocus/Save button fully down and release it.

2. Use the joystick to select

3. Push the joystick to display a submenu.

4. Use the joystick to select Sketch.

5. Push the joystick to display a sketchboard.

6. On this sketchboard you can:

• Draw a sketch.

• Change the color of the lines.

• Erase lines and start again.

• Erase the entire sketch.

The sketch will now be added to what is called a group, and will be grouped together

with the infrared image in the image archive, and also when moving files from the

camera to reporting software on the computer.

Follow this procedure:

1. To preview an image, push the Autofocus/Save button fully down and release it.

2. On the bottom toolbar, select the infrared image and push the joystick.

3. On the left toolbar, select the Sketch toolbar button and push the joystick.

#T559598; r. AB/ 9443/9443; en-US

Table of Contents