Quick Start Guide; Procedure - FLIR T4xx series User Manual

5

Quick Start Guide

5.1 Procedure

Follow this procedure:
1. Charge the battery for four hours.
2. Insert the battery into the camera.
3. Insert an SD Memory Card into the card slot at the bottom of the camera.
4. Push the On/Off button to turn on the camera. Allow 45 seconds for the startup
sequence.
5. Aim the camera toward your target of interest.
6. Push the Preview/Save button halfway down to autofocus the camera.
7. Push the Preview/Save button fully down to save an image.
8. Do one of the following:
• Remove the SD Memory Card and insert it into a card reader connected to a
computer.
• Connect a computer to the camera using a USB Mini-B cable.
9. Move the image from the card or camera using a drag-and-drop operation.
#T559772; r.7877/7877; en-US
9