Power supply removal
To remove the power supply, do the following:
1.
2.
3.
4.
20-pin power supply connection
See "System board layout" on page 17 for connector location.
Attention: These voltages must be checked with the power supply cables connected
to the system board.
34
IBM IntelliStation Type 6866: Hardware Maintenance Manual
Remove the side cover.
Disconnect the power supply cables.
Remove the power supply screws c 1 d
Slide the power supply toward the front of the system c 2 d and lift the power
supply out of the system c 3 d .
1
11
10
20