Cd-Rom Drive Jumper Settings - IBM IntelliStation 6866 Hardware Maintenance Manual

CD-ROM drive jumper settings

CD-ROM and PC/CD-ROM drives use jumpers or tabs to set the drives as primary
(master) or secondary (slave). Refer to the drive connector labels or the figures below
for the drive settings.
AUDIO
R G G L
CD-ROM, PD/CD-ROM Type
16X Max CD-ROM
24X Max CD-ROM
32X Max CD-ROM
40X Max CD-ROM
48X Max CD-ROM
IDE INTERFACE
39
40
See jumper
settings below
Primary (Master)
DC INPUT
1
5V G G 12V
2
Secondary (Slave)
: : cd
: : cd
: : cd
: : cd
: : cd
FRU replacements
: cd :
: cd :
: cd :
: cd :
: cd :
33