Table of Contents
Advertisement
3.
Disconnect the power and hard disk drive fan cables on the memory card.
4.
Push the tab on the back of the memory card inward and pull the memory card
out of the chassis.
5.
At both ends of the RIMM connector, push outward on the retaining clips until
the module is loosened. Lift the RIMM or C-RIMM out of the connector.
Note: Be careful not to push too hard on the retaining clips, because the RIMM or
C-RIMM might eject too quickly.
21
FRU replacements
Advertisement
Chapters
Table of Contents
