Table of Contents
Advertisement
POST Error Code
20005 to 20010
200XXNot listed above
20101 to 20103
20104
20105 to 20110
Image Adapter/A Memory Test failure indicated by
graphic of adapter
206XX
208XXVerify there are no duplicate SCSI ID settings on the
same bus.
210XXXX Internal bus, size unknown210XXX1External
bus, size unknown
Tape Drive amber LED remains on
Tape Drive green "in use" LED fails to come on
Tape automatically ejected from drive
SCSI ID on rotary switch does not match SCSI ID set in
configuration. Verify drive switches inside cover are set to
zero
Tape sticks or breaks in drive. Verify that the tapes used
meet ANSI standard X3B5
FRU/Action
1.
Image Adapter/A
Image-I Adapter/A
2.
Memory Module DRAM, VRAM
1.
Image Adapter/A
2.
Image-I Adapter/A
3.
Memory Module DRAM, VRAM
4.
System Board
1.
Printer/Scanner Option
2.
Image Adapter/A
3.
Memory Module DRAM, VRAM
1.
Memory Module DRAM, VRAM
2.
Printer/Scanner Option
3.
Image Adapter/A
1.
Printer/Scanner Option
2.
Image Adapter/A
3.
Memory Module DRAM, VRAM
1.
Replace memory module (shown in graphic)
1.
SCSI-2 Adapter
2.
Any SCSI Device
3.
System Board
1.
Any SCSI Device
1.
SCSI Hard Disk Drive
2.
SCSI Adapter or System Board
3.
SCSI Cable
4.
SCSI ID Switch (on some models)
1.
Tape Drive
2.
SCSI Cable (internal)
3.
SCSI Adapter or System Board
1.
Tape Drive
2.
SCSI Adapter or System Board
3.
SCSI Cable (internal)
4.
SCSI Cable (external)
1.
Tape Cassette
Drive
1.
Rotary Switch Circuit Board
2.
Circuit Board Cable
3.
Tape Drive
1.
Tape Cassette
77
Symptom-to-FRU index
Advertisement
Chapters
Table of Contents
