7
2
Clean the surface of the two
conveyance belts with a soft cloth
dampened slightly with alcohol
(cleaner).
3
Move the conveyance belt to clean
the whole length.
–
Raise the two belts lightly, then
pull them both frontward at the
same time in order to show the
hidden parts.
–
Do not raise the belt higher than
need be, or never fail to pull the
two belts at the same time;
otherwise machine trouble may be
caused.
–
Clean the belts in the same way as above, using a soft cloth
dampened with alcohol.
–
Repeat steps 2 and 3 (about three times) to clean the whole round
of the belt.
4
Clean the bottom plate of the saddle
stitcher tray.
–
Wipe the whole surface of the
bottom plate with a soft cloth
slightly dampened with alcohol
(cleaner).
5
Return the tray stand to its original position, then return the saddle
stitcher tray.
7-8
Maintenance
bizhub PRO C6500P