Konica Minolta bizhub pro C6500P User Manual page 398

3
4
Select the PB tray or desired main body tray, then press [Start] on the
control panel. A sample pattern of perfect-bound book will be output.
5
Check that the position of spine corner of the cover is formed uniformly
against the horizontal direction.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
7
Touch [Up/Down (Forward) Adj.] or [Up/Down (Rear) Adj.] to select
(Forward) or (Rear) for the adjustment.
8
Touch [+ <-> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 (down) to +127 (up), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
3-76
Adjustment
bizhub PRO C6500P