Konica Minolta bizhub pro C6500P User Manual page 411

Adjustment
3
Display the required size key using up/down arrow keys to select the
paper size of the body set to be attached with the cover.
4
Touch [PRINT] tab.
The Print Screen will be displayed.
5
Select the PB tray or desired main body tray, then press [Start] on the
control panel.
A sample pattern of perfect-bound book will be output.
6
Check that the horizontal direction is equal on all pages of the body set.
If unequalness appears on the latter half of body pages while the
former half shows equalness, proceed to the next step.
If it is not equal on all pages, use 08 Sub Compile CD Width
Adjustment.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
8
Touch [+ <-> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
bizhub PRO C6500P
3
3-89