Konica Minolta bizhub pro C6500P User Manual page 351

Adjustment
4
Load the desired size of paper to be adjusted on a tray, specify Folding,
then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
5
Check the misalignment (a) of the edge of the feeding sheets.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Half Fold Position Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -50 to +50, 1 step = 0.1 mm
– When misalignment (a) of step 5 has occurred, enter the "+" value.
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
10
If adjustment in any other size is required, repeat steps from 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
bizhub PRO C6500P
a
3
3-29