Konica Minolta bizhub pro C6500P User Manual page 423

Adjustment
4
Load the desired size of paper to be adjusted on a tray, specify Punch,
then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
5
Check the value of misalignment (a) between the center-fold line and
punch position.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Vertical Position Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
8
Touch [+ <-> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10
If adjustment in any other size is required, repeat steps from 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
bizhub PRO C6500P
[1]
a
[2]
3
3-101