Konica Minolta bizhub pro C6500P User Manual page 396

3
4
Display the required size key using up/down arrow keys to select the
paper size of the body set to be attached with the cover.
5
Touch [PRINT] tab.
The Print Screen will be displayed.
6
Select the PB tray or desired main body tray if selected in step 3, then
press [Start] on the control panel.
A sample pattern of perfect-bound book will be output.
7
Check that the edge of the left cover page extends out of the body set
by the desired amount.
8
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
9
Touch [+ <-> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 (short) to +127 (long), 1 step = 0.1 mm
10
Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
!
Detail
If "All Size" is selected as paper size, the entered adjustment value will be
applied to all sizes. If specific paper size is selected, adjustment value will
be the sum of the entered value and the value previously specified for "All
Size".
3-74
Adjustment
bizhub PRO C6500P