Konica Minolta bizhub pro C6500P User Manual page 385

Adjustment
4
Load the desired size of paper to be adjusted on a tray, specify the
number of sheets to 5, then press [Start] on the control panel.
A sample pattern will be output.
5
Check that any dislocation is found in the output set.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Fold Paper Width Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
– If the setting is too wide, the distance of misalignment may be larg-
er.
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
10
If adjustment in any other size is required, repeat steps 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
bizhub PRO C6500P
3
3-63