Konica Minolta bizhub pro C6500P User Manual page 213

Supplies & Handling
3
Load cover paper in the tray.
– Place cover paper faceup, with
the top to be rear in the tray.
When making the book bound on
the right side, the front side in the
tray will be the top.
4
Align the side guide plates and rear
edge guide to cover paper.
– Press the release knob of the
front side guide plate to move the
side guide plates, and also move
the rear edge guide to the edge of
cover paper.
5
When paper is seated properly, close the paper feed roller.
6
Push in the tray until it locks into place.
Reminder
Do not load above the limit level, and carefully load the paper to be seat-
ed under the paper holding lover at the air nozzle.
Be sure that the side guide plates and rear edge guide are securely
aligned to the paper; otherwise a paper jam may be caused.
Do not bump the tray into the perfect binder; otherwise machine trouble
may be caused.
bizhub PRO C6500P
6
6-21