Konica Minolta bizhub pro C6500P User Manual page 149

Paper Information
Note
To output a chart for the Both Sides Adjustment, follow the procedure
below to set the adjustment value.
(1) Touch [Front] on the Both Sides Adjustment Screen to select the
printed side, then touch [Chart Adjustment].
(2) Touch [PRINT] tab to display the Print Screen.
(3) Press [Start] on the control panel to output a chart. Touch [Return] to
restore the Chart Adjustment Screen.
(4) Enter the adjustment data of the front side.
With Front selected:
Use a scale to measure. Enter the adjustment value from the screen
keypad.
Setting range: 0.0 to 999.9
(5) Touch [Adjustment Start].
(6) Repeat steps (2) to (5) until the desired result is obtained.
Touch [Close] to complete the front side setting.
(7) Similarly, touch [Back] and repeat the chart adjustment, if desired.
bizhub PRO C6500P
3
3-29