Konica Minolta bizhub pro C6500P User Manual page 56

1
For Users in countries not subject to Class B regulations
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This device must be used with a shielded network (10 Base-T/100 Base-TX)
cable and a shielded parallel cable. The use of non-shielded cables is likely
to result in interference with radio communications and is prohibited under
CISPR rules and local rules.
Laser Safety
This product employs a Class 3B laser diode having maximum power of 15
mW and wavelength of 775 - 800 nm.
This product is certified as a Class 1 laser product. Since the laser beam is
concealed by protective housings, the product does not emit hazardous la-
ser radiation as long as the product is operated according to the instructions
in this manual.
For Denmark Users
ADVARSEL
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion.
Undgå udsættelse for sråling.
Klasse 1 laser produkt der opfylder IEC 60825-1 sikkerheds kravene.
Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 15 mW og
bølgelængden er 775- 800 nm.
For Norway Users
ADVARSEL
Dersom apparatet brukes på annen måte enn spesifisert I denne bruksan-
visning, kan brukeren utsettes for usynlig laserstråling som overskrider
grensen for laser klass 1.
Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bøkge-
lengde er 775 - 800 nm.
1-42
Introduction/ Safety Information
bizhub PRO C6500P