Specifications - Mitsubishi GT11 User Manual

14.4.1 Specifications

1 System configuration
This section describes the system configuration of the MELSEC-FX list editor.
For further information about communication units and cables for each connection form, see the
following.
GOT1000 Series Connection Manual
2 Controllers that can be edited with the MELSEC-FX list editor
Target controller
FXCPU
3 Connection forms
Function name
Name
Description
Sequence program writing, parameter
MELSEC-FX list editor setting, PLC diagnostics and keyword
registration, etc.
*1 Indicates CC-Link connection (via G4).
4 Required option OS and option function board
The option OS and option function board shown below are required.
Option OS
MELSEC-FX list editor
(1) Option OS
Install the option OS in the above table to the GOT.
Refer to the following manual for the procedure for installing the option OS.
GT Designer2 Version
GT Designer3 Version
(2) OS memory space
The available memory space shown in the table above is required in the user area to install the
option OS to the GOT.
Refer to the following manual for the procedure for checking the available memory space of the
user area and information about the data using other user areas.
GT Designer2 Version
GT Designer3 Version
(3) Option function board
For how to mount an option function board on the GOT, refer to the following manual.
Section 8.3 Option Function Board
Bus
connection
OS memory space (user area)
0KB
Basic Operation/Data Transfer Manual
Screen Design Manual (Fundamentals)
Basic Operation/Data Transfer Manual
Screen Design Manual (Fundamentals)
Connection form between GOT and PLC
Direct CPU Computer link
connection connection
Option function board
GT11-50FNB
14.4 MELSEC-FX List Editor
14.4.1 Specifications
( : Available, : Unavailable)
CC-Link
GOT multidrop
connection
connection
*1
G4
14 - 89
9
10
11
12
13
14
15
16