Mitsubishi GT11 User Manual page 170

7 Upload
Transfers the project data from the C drive (Flash Memory) to the A drive (Built-in CF card).
13 - 23 13.3 Project Information
13.3.4 Operation of project information
1 Mount the CF card to GOT.
For the CF card installation/removal
method, refer to the following.
Section 8.1 CF Card
2 Touch "A: Standard CF card" in the drive
selection.
3 If touching
Upload
shown on the left is displayed.
4 If touching button, the upload is
OK
executed.
5 If there is a project data of the same name
in the A drive, the screen shown on the left
is displayed without starting the upload.
If touching button, an overwrite
OK
upload is executed to the project data of
the same name.
If touching
Cancel
canceled.
6 When the upload is completed, the
dialogue box shown on the left is displayed.
If touching button, the dialogue box is
OK
closed.
button, the screen
button, the upload is