Key Functions - Mitsubishi GT11 User Manual

3

Key functions

The table below shows the functions of the keys that are used for the operation on the MELSEC-FX list
editor screen.
to
to
4 Keyboard switching
Touching the
When you touch the button for a keyboard function, the optimum keyboard for input for that function is
displayed automatically.
14 - 96 14.4 MELSEC-FX List Editor
14.4.5 Operation procedures
Key
Selects a mode for MELSEC-FX list editor. (
of modes)
Displays the PLC diagnostics, parameter setting, and keyword selection menu.
Switches between command keyboard 1 and command keyboard 2.
(
When inputting commands :Cancels the key input when only part of the command has been
input. (
When option menu is displayed: Closes the option menu.
Commands cannot be deleted with this key. (
Space key.
This key is used when setting timers and counters, writing applied commands, etc.
Displays the list from a specified step No. when the step No. is input.
Moves the list display area bar up and down and switches the line being edited.
Determines the key operation.
Inputs commands, device names, etc.
, The key contents depend on the input contents.
The commands that can be used differ depending on the target FX PLC.
Refer to the manual for the FX PLC to be used.
, etc.
Exits the MELSEC-FX list editor.
MORE button switches the command keyboard 1 and command keyboard 2.
Command keyboard 1
Function
"Keyboard switching" in this section)
Subsection 14.4.17 Action for an incorrect key input)
Command keyboard 2
Touch
Touch
Subsection 14.4.6 Selection and operation
Subsection 14.4.11 Deleting commands)